Eupheng Fly Tying Vise Jaws 360 Degree Rotation Adjustable Fly Tying Equipment Diy Fly Tying Lure Flies Make Tools

User instruction:

• 1、Turn the jam nut clockwise to move down fully and tighten until the tube body cannot move.

• 2、Turn the rotary screw counterclockw.0ise to loosen the jaw to hold the hook. Then turn clockwise to tighten the jaw until the hook is properly clamped.

• 3、Turn the jam nut counterclockwise to move up fully (at least 4 full circles) and loosen the tube body, then you can rotate it freely.

User instruction:

• 1. Move the lever up to loosen the jaw to hold the hook. Then press the lever down to tighten the jaw until the hook is properly clamped.

• 2. If the jaw opening is too small or large for the hook, please adjust the front opening screw to get the jaw proper open size fitting the hook.

• 3. Adjust the jam nut to the desired amount of resistance when you perform the rotation.

User instruction:

• 1、The locking lever at the six o’clock position is free position. Turn the locking lever to the five or four o'clock position.

• 2、Put hook in the jaw, then adjust jaw screw to hold the hook stable.

• 3、Turn the locking lever to the 3 o'clock position to full lock.

• 4、Adjust two jaw nuts together to get your desired amount of resistance in rotation.

User instruction:

• 1. Move the lever down to loosen the jaw to hold the hook. Then press the lever up to tighten the jaw until the hook is properly clamped.

• 2. If the jaw opening is too small or large for the hook, please adjust the front opening screw to get the jaw proper open size fitting the hook.

• 3. Adjust the jam nut to the desired amount of resistance when you perform the rotation.